Sensors
Flow Detective - IC-CMLFlowdetective
Product code: IC-CMLFlowdetective
The Flow Detective is a digital flow meter for the accurate calibration of personal sampling pumps and other equivalent devices. This is the standard model for medium flow air sampling pumps (0.5 to 5L/min).
$2,025.00
AUD + GST
$2,227.50
AUD Inc. GST
DataSnap SDI-12 Data Logger
Product code: DataSnap
Portable SDI-12 mini data recorder compatible with all sensors that communicate using SDI-12 protocol. -Can accommodate up to 10 SDI-12 sensors. -Takes over 53,000 5-datapoint scans before it overwrites the oldest data. -Can be powered using batteries or AC adapter.
$530.00
AUD + GST
$583.00
AUD Inc. GST
Sigfox-Ready Thermal mass Gas Flowmeter
Product code: WSSFC-TMF128-G-DN20
WSSFC-TMF128 is a Sigfox-Ready Thermal mass gas flow meter designed especially for Oxygen, Nitrogen, or Compressed Air flow measurement. -Delivers accuracy better than 3% of reading plus 0.5% of span. -Can be configured via Sigfox downlink or RS485 Modbus RTU. -Compatible with RC1, RC2, and RC4 regions.
$2,010.00
AUD + GST
$2,211.00
AUD Inc. GST
TDR-310W Soil Moisture Sensor
Product code: TDR-310W
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes for greenhouses.
$638.00
AUD + GST
$701.80
AUD Inc. GST
TDR-315N Soil Moisture Sensor
Product code: TDR-315N
A fully integrated digital TDR soil moisture sensor that has demonstrated superb accuracy consistently with excellent repeatability between six different soils including potter’s clay.
$638.00
AUD + GST
$701.80
AUD Inc. GST
High Sensitivity Rogowski Coil CT for MIRO PQ35 and MIRRIN Logger - 1AFF3000-6-H
Product code: 1AFF3000-6-H
The high sensitivity CAT IV 600V flexible current probes are a high performance current sensor specifically designed as an accessory for CHK MIRO PQ35 used on energised circuits and in CAT IV environments.
$510.00
AUD + GST
$561.00
AUD Inc. GST
1ADCR500 52 Series CAT III 600V AC/DC Current Clamp-On Probes
Product code: 1ADCR500
The 52 Series CAT III 600V AC/DC Current Clamp-On Probes are high performance current converters incorporating a Hall Effect sensor within a split core window current transformer with low ratio and phase errors. Specifically designed as an accessory for CHK Power Quality instruments Miro PQ35, used in CAT III 600V environments.
$593.00
AUD + GST
$652.30
AUD Inc. GST
1ADC500 52 Series CAT III 600V AC/DC Current Clamp-On Probes
Product code: 1ADC500
The 52 Series CAT III 600V AC/DC Current Clamp-On Probes are high performance current converters incorporating a Hall Effect sensor within a split core window current transformer with low ratio and phase errors. Specifically designed as an accessory for CHK Power Quality instruments Miro PQ45, used in CAT III 600V environments.
$593.00
AUD + GST
$652.30
AUD Inc. GST
1ASC500 52 Series CAT IV 600V AC Current Clamp-On Current Sensors
Product code: 1ASC500
The 52 Series CAT IV 600V AC Current Clamp-On Probes are a high performance current sensor incorporating a split iron core window current transformer with low ratio and phase errors. Specifically designed as an accessory for CHK Power Quality instruments Miro PQ45 for use in energised circuits and in CAT IV environments.
$593.00
AUD + GST
$652.30
AUD Inc. GST
52 Series CAT IV 600V AC Current Clamp-On Current Sensors
Product code: 1ASC100
The 52 Series CAT IV 600V AC Current Clamp-On Probes are a high performance current sensor incorporating a split iron core window current transformer with low ratio and phase errors. Specifically designed as an accessory for CHK Power Quality instruments Miro PQ45 for use in energised circuits and in CAT IV environments.
$593.00
AUD + GST
$652.30
AUD Inc. GST
1ACR500 CAT IV 600V AC Current Clamp-On Current Sensor
Product code: 1ACR500
The 52 Series CAT IV 600V AC Current Clamp-On Probes are a high performance current sensor incorporating a split iron core window current transformer with low ratio and phase errors. Specifically designed as an accessory for CHK Power Quality instruments Miro PQ35 for use in energised circuits and in CAT IV environments.
$593.00
AUD + GST
$652.30
AUD Inc. GST
16 Sensor Enviropro - Moisture, EC Salinity & Temperature
Product code: EP100G-16
The soil EP100G-04 moisture probes measure moisture, salinity and temperature of all types of soil. Its revolutionary design gives you consistent data year after year and its readings are compensated for the effects of temperature caused errors, giving you measurements which you can depend on. With a sensor every 10cm, you can take the movement of water through the root zone. You know exactly where the moisture is and at what depths the plant is using it. 166.5 cm in length. Compatible for all crop root depths. Maintenance free and easy to install.
$2,890.00
AUD + GST
$3,179.00
AUD Inc. GST
12 Sensor Enviropro - Moisture, EC Salinity & Temperature
Product code: EP100G-12
The soil EP100G-04 moisture probes measure moisture, salinity and temperature of all types of soil. Its revolutionary design gives you consistent data year after year and its readings are compensated for the effects of temperature caused errors, giving you measurements which you can depend on. With a sensor every 10cm, you can take the movement of water through the root zone. You know exactly where the moisture is and at what depths the plant is using it. 126.5 cm in length. Compatible for all crop root depths. Maintenance free and easy to install.
$2,090.00
AUD + GST
$2,299.00
AUD Inc. GST
8 Sensor Enviropro - Moisture, EC Salinity & Temperature
Product code: EP100G-08
The soil EP100G-04 moisture probes measure moisture, salinity and temperature of all types of soil. Its revolutionary design gives you consistent data year after year and its readings are compensated for the effects of temperature caused errors, giving you measurements which you can depend on. With a sensor every 10cm, you can take the movement of water through the root zone. You know exactly where the moisture is and at what depths the plant is using it. 86.5 cm in length. Compatible for all crop root depths. Maintenance free and easy to install.
$1,390.00
AUD + GST
$1,529.00
AUD Inc. GST
1 in stock
4 Sensor Enviropro - Moisture, EC Salinity & Temperature
Product code: EP100G-04
The soil EP100G-04 moisture probes measure moisture, salinity and temperature of all types of soil. Its revolutionary design gives you consistent data year after year and its readings are compensated for the effects of temperature caused errors, giving you measurements which you can depend on. With a sensor every 10cm, you can take the movement of water through the root zone. You know exactly where the moisture is and at what depths the plant is using it. 46.5 cm in length. Compatible for all crop root depths. Maintenance free and easy to install.
$990.00
AUD + GST
$1,089.00
AUD Inc. GST
True TDR-310S Soil Moisture Sensor
Product code: TDR-310S
This TDR is from the same family of the other Acclima True TDRs, however its rounded form factor allows it to easily attached to a (sched. 40) 1″ PCV pipe and/or be inserted into an access tube as small as 1.25″ (sched. 40 PVC) to be inserted into the soil at a specified depth.
$595.00
AUD + GST
$654.50
AUD Inc. GST
Integrated True TDR Digital Soil Moisture Sensor - IC-ACC-TDR-315H
Product code: IC-ACC-TDR-315H
Fully Integrated Digital TDR. All electronics in sensor. SDI-12 Output. Low power consumption. 15cm waveguide length.
$595.00
AUD + GST
$654.50
AUD Inc. GST
Thermocouple Hand Probe, Film Type K, Flat Mylar, 150 Mm X 6 Mm X 1.6 Mm thick with 2 Mtr curly cord mini plug. Maximum Temperature 300 Deg C.
Product code: IC-TCLS035H
Thermocouple Hand Probe, Film Type K, Flat Mylar, 150 Mm X 6 Mm X 1.6 Mm thick with 2 Mtr curly cord mini plug. Maximum Temperature 300 Deg C.
$135.00
AUD + GST
$148.50
AUD Inc. GST
Classic Fluorometer Sensor, SDI-12 - IC-1006
Product code: IC-1006
The SDI-12 connection enables the standard Aquation Fluorescence Sensor to be connected to industrial or process systems such as greenhouses or phenotyping facilities, or any controller/datalogger system that communicates with the SDI-12 protocol
Classic Fluorometer Sensor, Ethernet - IC-1010
Product code: IC-1010
The ethernet connection enables the standard Aquation Fluorescence Sensor to be connected to systems and terminals that communicates with the ethernet protocol
100m Roll - Cable Type T PVC/PVC 24 AWG Solid
Product code: IC-TCTPP124
100m Roll - Cable Type T PVC/PVC 24 AWG Solid
$130.00
AUD + GST
$143.00
AUD Inc. GST
100m Roll - Cable Type K PVC/PVC 24 AWG Solid
Product code: IC-TCKPP124
100m Roll - Cable Type K PVC/PVC 24 AWG Solid
$200.00
AUD + GST
$220.00
AUD Inc. GST
Custom Waterproof Probe / Type T / 4mm x 100mm SS Tip / 2m CBL with Mini Plug
Product code: TS-CUSTOM-305769
Custom Waterproof Probe / Type T / 4mm x 100mm SS Tip / 2m CBL with Mini Plug.
$99.00
AUD + GST
$108.90
AUD Inc. GST
$209.31
AUD + GST
$230.24
AUD Inc. GST
TS-18K-539789 Type K Custom Probe
Product code: TS-18K-539789
Type K, 1.5mm diameter x 135mm long stainless probe, with 300mm PVC lead and miniplug.
$89.00
AUD + GST
$97.90
AUD Inc. GST
1 in stock
TS-18K Custom Probe
Product code: TS-18K-CUSTOM
Type K MI Sheath 3mm x 200mm with high temp pot seal & 4mtr fibreglass lead.
$89.00
AUD + GST
$97.90
AUD Inc. GST
1 in stock
IIG PSSL-20 Portable Suspend Solids Sensors (Low Range)
Product code: IC-IIG-PSSL-20
This Portable Suspended Solids sensor is more appropriate for lower ranges. It incorporates near infrared technology to provide increased dependability of the reading when color changes in the solids occur.
$2,165.00
AUD + GST
$2,381.50
AUD Inc. GST
IIG PSS-20 Portable Suspend Solids Sensors (Standard)
Product code: IC-IIG-PSS-20
The Portable Suspended Solids Standard sensor incorporate near infrared technology to provide increased dependability of the reading when color changes in the solids occur.
$2,165.00
AUD + GST
$2,381.50
AUD Inc. GST
Standard penetration probe (TC type T, lockable)
Product code: 0602-1081
Lockable, standard, penetration probe enables reliable temperature measurements in the food sector with the appropriate equipment. -Thermocouple type T -Measuring range: -50 to +300°C
$69.44
AUD + GST
$76.38
AUD Inc. GST
Testo TC immersion probe type T (Push fit connection) - IC-0602-1080
Product code: IC-0602-1080
Immersion probe type T with water tight connector. Especially developed for testo 108-1.
$69.25
AUD + GST
$76.18
AUD Inc. GST